As well as being very easy to operate, the machine also excels with its well-thought-out service concept. 164 kW paired with the BOMAG cutting technology result in an incomparable performance.
The three variable cutting and milling speeds are easy to set using a switch on the control panel. This allows for the correct speed for each application and the best surface quality. It also reduces wear on the rotors. At the same time, the advance travel speed is automatically maximized – the advance travel speed can go up to the limit.
The spring supended seat can be shifted sideways by up to 120 mm. From this position, the operator has a clear side view to the working area.
The cold planer is equipped with powerful LED lights. So even wrking at night is no problem.
Four wide-opening service doors make all maintenance points easily accessible. Servicing can be done comfortably in a standing position.
With the optional washing attachment, the machine can be quickly cleaned on the job site when the dirt is still fresh and can be easily rinsed off. The dirt stays on jobsite. Performed daily, such maintenance guarantees the machine's durability.
The optimised drum design in combination with the BMS 15 L holder system ensures maximum milling performance through low resistance and vibration.
This machine is significantly more efficient thanks to the toolholder's slim design. Fuel savings of up to 20% are possible.
The high-precision milling depth controller comes as standard. The exact current milling depth is clearly displayed in the driver's field of vision.
The wear-resistant digital display shows both the milling depth and the slope simultaneously.
The foldable conveyor belt can be adjusted up to a height of 4560 mm and swivelled 25° to either side.
This ensures flexibility and an accurate loading in combination with the truck. Both parameters can be easily adjusted by joystick.
Due to the well design cooling concept, the operator will not treated by hot and dusty air while milling.
Instead of other machines, the fresh air is sucked in from the top and blowed out on the front.
All maintenance points are well placed and easy to access. This allows the operator to perform all frequently required maintenance tasks quickly.
With a tightening torque of only 100 Nm, the cutters are easy to replace. The time required for a complete holder change is only about half the time needed for a conventional system.
Using sensors makes milling work easier and faster.
With the optional slope sensor, the machine is also utilized for job sites where the road slope needs levelling while milling.
The planer is powered by a 164 kW engine, one of the most powerful units in its class.
The engine offers maximum performance on a low fuel consumption. Another decisive factor that keeps everyday operating costs low.
The operator can choose whether to work standing up or sitting down.
The protective roof is well dimensioned and adjustable in height.
With a milling radius of 380 mm, one of the smallest in this class, milling in roundabouts, tight bends or around man holes is possible.
The optimised design of the front gives the operator excellent visibility, making the cold planer easy to manoeuvre and safer in every respect.
The operator can choose between 3 variable milling speeds, which can be easily set via a switch on the control panel.
Depending on the selected milling speed, the machine's advance travel speed is automatically adjusted and maximised. This ensures the optimal use of the engine output according to the jobsite behaviours. No components are subjected to excessive stress.
Our machines contain both power and performance. To deliver maximum productivity we invest heavily in perfecting our milling drums, holder systems and cutting tools.
This adds more cutting tools. Due to the high density of the cutting tools, fine milling creates a very fine surface texture and a low thickness up to 40 mm / 1.57 inch. Fine milling drums are used to increase the skid resistance of smooth road surfaces which have been “polished” by traffic. They can at the same time remove light ruts and uneven areas. In addition, these drums can be used to prepare sites for laying thin layers, to remove road markings and for fine milling of floor surfaces inside buildings.
The BMS 15 L holder system is slimmer than other systems. The effect is a lower resistance which reduces fuel consumption and improves the advance travel rate.
Cutting power per tool increases and pulverised material fragments are larger. Because of the reduced crushing effect in the milled material, energy is saved which can lead to a faster travel speed or lower fuel consumption. At the same time, the cutter has lower wear because the faster advance rate means the impact time of the cutting tools is reduced and they generate less heat. POWER DRUMS not only offer milling performance which is up to 30% higher than standard milling drums, they also provide lower wear and reduced fuel consumption. The line spacing of the cutters on the POWER DRUM is relatively wide and the surface structure created by milling is rough and coarse. POWER DRUMS are used to plane hard materials and for complete removal of asphalt pavements.
They can be used for multiple applications on a variety of milling jobs. The standard milling drum can be used for complete removal of whole road surfaces as well as for planing individual layers. The applications for standard planers extend from the removal of small sections of road (patches) to major surfacing work and road repairs, including milling duct trenches. The milled surface is an ideal base for laying new asphalt layers.
Further data on request / All data subject to change / Illustrations may contain optional features
Longevity and low maintenance are two essential design principles at BOMAG implemented in the smallest details, reducing service costs and non-productive time to a minimum. With BOMAG, all components for servicing are well positioned and freely accessible. This applies to tanks, service points in the engine compartment and work on the milling drum.
When you see BOMAG on a machine, you can expect real quality. This applies both to our original parts and our service. Opting for a BOMAG means choosing top quality every time. Original parts and service are there to protect your investment. They ensure 100% machine power and availability – and ultimately the productivity and cost-effectiveness of your company. BOMAG offers a range of service products to keep you on the road.