BC 773 EB-5 soil compactor: The benchmark for earthworks and mineral waste landfill.

The rear side windows have electric heating for good visibility during blind spot checks and to prevent the windows from misting up. The soil compactor's mirrors are also heated and electrically adjustable.

The standard rear-view camera shows what is behind the machine. The optional object detection system sounds a warning signal in case of danger.

The optimal dozer blade height can be precisely adjusted. The Blade Stepper function allows the dozer blade to be raised in a predefined way and also returns the blade to its original position.

Frequently used dozer blade positions, such as the push position, can be easily saved and accessed again.

In addition, a complete workflow can be generated from the input parameters of blade height and speeds. Recurring cycles can be saved and automated.

Compared to a machine of the same weight, fuel savings of up to 10% can be achieved. The engine always runs in the optimal speed range (ECOMODE). All that is required here is to preselect the travel speed. The machine then maintains this speed even under a wide range of loads.

After a defined idling time, the engine switches off automatically (ECOSTOP).

Machine data such as rpm and hydraulic pressure can also be called up at the push of a button for quick fault analysis. When servicing is required, the technician knows in advance what to expect and usually already has the required spare part at hand.

The cab is fitted as standard with an automatic heating and climate control system. A modern air supply system creates a slight overpressure in the cab. This keeps dust out.

As an option, a protective ventilation system can be fitted ex works. The soil compactor can then also be used on contaminated materials and substances hazardous to health.

The most important machine parameters: Dozer blade position and speed are continuously shown on a large display. The temperature is only displayed if it becomes critical.

It is also possible to view information on the gradient and camber, current fuel consumption and the remaining working time or range.

Different working speeds can be preset with the cruise control to suit the respective material and for forward and reverse travel.

The speed can also be adjusted via the function keys on the joystick – everything is very simple.

All important machine components are well protected, thanks to the fully enclosed frame pan – a factor that significantly reduces maintenance work. The hydraulic components can be accessed directly from below through a large service door.

The engine hood can be opened electrohydraulically. All service points for the daily check can be accessed from the left platform. The check can be easily performed on the way to the workplace.

Charge air, hydraulic oil and coolant are only cooled as much as is necessary. Compared to a machine where the fan output is directly coupled to the engine speed, the potential fuel saving is about 5%.

The air intake is located at the highest point of the machine. This is where the dust content is lowest. In addition, the air flow can be reversed: this makes it very easy to clean the radiator and the protective grille.

The inclination angles of the oscillating articulated joint reach absolute peak values of plus/minus 15 degrees. Every wheel is always in contact with the ground. The control system can supply each wheel with the required amount of oil by means of a steering angle sensor.

The result: no displacement, no slipping, maximum traction and compaction – at all points. Previous compaction work also remains intact when the machine passes over it again.

A bottle holder and radio are fitted as standard, as is an automatic heating and climate control system. A winter package with auxiliary heater is available as an option.

The cab is vibration-insulated and soundproofed. The noise level in this soil compactor is the same as in a passenger car.

The wide comfort seat with air suspension enables fatigue-free working. The joysticks are integrated directly in the armrests.

Even if there is difficult terrain to negotiate on the landfill site: the wide, full-length footrest provides the driver with optimum support on inclines.